1
00:00:00,560 --> 00:00:03,830
In the last section, we finished up the installation of this system image.

2
00:00:03,850 --> 00:00:09,250
So this is the actual copy of Android that is going to be running on our emulator on.

3
00:00:09,260 --> 00:00:13,850
Now, select the image that I just downloaded a click on next and then finish.

4
00:00:15,480 --> 00:00:19,320
Now, when you cook and finish, it might just hang for a minute or two, which is totally fine, and

5
00:00:19,320 --> 00:00:22,510
then you'll see the new emulator that we just put together up here, right here.

6
00:00:22,860 --> 00:00:27,840
Now, I have to just because I already previously had one emulator going, I just created another one

7
00:00:27,840 --> 00:00:29,230
to walk this process with you.

8
00:00:29,940 --> 00:00:33,930
So now to start up the emulator, I'll find the play button on the far right hand side.

9
00:00:34,960 --> 00:00:38,090
Now click that and then it's going to start the emulator up.

10
00:00:38,680 --> 00:00:43,810
So here's the emulator window and I'll very quickly see the application or see the Android operating

11
00:00:43,810 --> 00:00:45,340
system start to boot up inside there.

12
00:00:46,180 --> 00:00:47,500
So now all that is starting up.

13
00:00:47,830 --> 00:00:51,970
I'm going to flip back over to my terminal and we're going to start it on the process of actually booting

14
00:00:51,970 --> 00:00:56,060
up our flutter application and getting it to run on this device over here.

15
00:00:56,920 --> 00:01:01,900
So back inside my terminal window, I'm going to first run a command to make sure that our installation

16
00:01:01,900 --> 00:01:06,310
process is pretty much where we expect it to be, which is essentially complete.

17
00:01:07,490 --> 00:01:13,040
So to do so, I'm going to run a command flutter doctor, doctors, a command that's going to take a

18
00:01:13,040 --> 00:01:17,900
look at some different aspects of flutter on your machine and make sure that everything is set up and

19
00:01:17,900 --> 00:01:18,550
ready to go.

20
00:01:19,600 --> 00:01:25,360
So I'll run this, and that's going to pronounce some status information and you'll notice that we see

21
00:01:25,360 --> 00:01:28,640
first right here flutter, that means that we have successfully installed a flutter.

22
00:01:29,320 --> 00:01:33,460
You'll notice that for me there is a exclamation point next to Android toolchain.

23
00:01:34,120 --> 00:01:38,530
So the exclamation right here means that we still have a little bit of work to do to actually set this

24
00:01:38,530 --> 00:01:38,900
thing up.

25
00:01:39,790 --> 00:01:45,460
The message says to resolve this issue, you have to run the command, flutter Dr Dash, dash, android,

26
00:01:45,460 --> 00:01:46,660
dash licences.

27
00:01:47,050 --> 00:01:48,220
And so we'll do that right now.

28
00:01:48,640 --> 00:01:53,380
I'm going to run that command, so I'll just copy that, paste it down here again.

29
00:01:53,380 --> 00:01:56,380
Flutter Dr Dash, dash android dash license's.

30
00:01:57,460 --> 00:01:58,120
I'll run it.

31
00:01:59,680 --> 00:02:03,580
And then we're going to see a couple of, like, little thingamajigs down here, say, hey, do you

32
00:02:03,580 --> 00:02:04,480
want to accept this?

33
00:02:04,970 --> 00:02:07,270
So you're just going to say why and enter?

34
00:02:07,270 --> 00:02:08,080
Why Dementor?

35
00:02:08,080 --> 00:02:08,770
Why the venture?

36
00:02:08,770 --> 00:02:09,539
Why the venture?

37
00:02:09,820 --> 00:02:10,900
And that's pretty much it.

38
00:02:11,590 --> 00:02:14,110
So we can now run flutter doctor again.

39
00:02:15,690 --> 00:02:20,210
Now we should see flutters, good to go, Android Toolchain is good to go, Android Studio is good to

40
00:02:20,210 --> 00:02:20,480
go.

41
00:02:20,480 --> 00:02:28,130
And we have a connected device which now run flutter devices and it will print out the name of the Android

42
00:02:28,130 --> 00:02:30,500
device that Flutter is going to try to run itself on.

43
00:02:31,280 --> 00:02:33,470
So the Android emulator is listed right here.

44
00:02:33,470 --> 00:02:37,190
So I think we're ready to actually test this out and start out that application that we had previously

45
00:02:37,190 --> 00:02:39,500
generated using the flutter command line tool.

46
00:02:40,250 --> 00:02:43,340
Now, in my terminal, you'll notice that I'm inside of that pix directory.

47
00:02:43,670 --> 00:02:48,290
That is the project that we generated like three sections ago using the Flutter SDK.

48
00:02:48,980 --> 00:02:54,050
So make sure that you're inside of that text directory, the directory that we just generated, and

49
00:02:54,050 --> 00:02:59,900
then once you're inside there will run the command flutter run, which is how we boot up, flutter and

50
00:02:59,900 --> 00:03:03,320
automatically deploy the application to the emulator over here.

51
00:03:03,890 --> 00:03:08,540
So we'll execute, flutter, run, and then we're going to see a little bit of installation or setup

52
00:03:08,540 --> 00:03:09,770
processes right here.

53
00:03:09,890 --> 00:03:11,750
Again, it's going to take just a minute or two.

54
00:03:11,750 --> 00:03:16,130
So we'll take another quick pause and then wrap up with the entire installation in the next section.

55
00:03:16,430 --> 00:03:17,630
So I'll see you in just a minute.